Home > About us > News

2018-10-15

Piston RDA Unxboxing

 written by: VAPE禁煙チャレンジ中  5bd03dd19b521a22effd8842_origin.jpg5bd03dd19b521a22effd8842_origin.jpg


Pod type VAPE gadget and MTL atomizer are popular, but I prefer tasting Osassu to DL faction, mist chemistry. Does not it become fun to spit muscles mist?

The RDA provided this time is a bomb smoke type that gives mist a muzzle.

MASKKING PISTON RDA review

20181014024231.jpg

package



20181014025119.jpg
20181014025107.jpg

  • PISTON RDA × 1
  • Clapton coil × 5
  • Adapter for 510 × 1
  • Hexagonal wrench × 1
  • Replacement O-ring, replacement screw

PISTON RDA

  • Size: 24 mm diameter × 26 mm
  • Material: SS 316 PEI
  • Dual coil prerequisite deck
  • 510 thread
  • Drip tip: 810

Heat sink shape at the top of the cap is characteristic. In fact, heat dissipation is good and it is hard to get hot due to the effect of a larger PEI drip tip.
20181014031357.jpg
Conversion adapter is also included and 510 standard drip tip can be used.
20181014031510.jpg20181014031515.jpg20181014031520.jpg
20181014031421.jpg
Three points including simple deck, cap, and drip tip
20181014032126.jpg

The back side of the cap has a dome shape, an oval hole for air flow adjustment is open to the other side.

It is a pity that I type around when I cover the deck.

20181014032400.jpg
PEI made drip tip is quite thick
20181014032642.jpg
There is also a space that can use a large coil with a deck with quite deep juice wells. Finish is also beautiful well.
20181014032744.jpg

The airflow is open obliquely upward. It is a structure to apply air from the coil diagonally from the bottom to the top.

On the positive side of the deck, the shape of the coil feet does not escape and the build seems not to be so difficult.

20181014033046.jpg
I tried assembling with the attached coil (0.21 Ω) It is easier for the person who removed the outside screw to remove it.
20181014033525.jpg
20181014033941.jpg
Let's vape it

20181014034041.jpg

When airflow is fully opened, it is scarce, if it is fully closed, it can hardly be absorbed.

Because it is a Clapton coil it is not good to stand up if it is about 20 W.

Raising to about 40 W will generate a lot of mist

It is a feeling that "Mist output it", but the taste comes out surprisingly.

I will try to organize it even with a single wire.

20181014034845.jpg
I tried sucking at about 40 W, but even with a single wire, it will be completely white in the room with enough mist volume.

Atomizer fitting

20181014035814.jpg
20181014040148.jpg
20181014040205.jpg
20181014040220.jpg

MASKING PISTON RDA Summary

20181014040845.jpg

It is an RDA that tastes with a large amount of mist by burning it. A mist worthy of singing cloud chaser occurs. On the contrary, the impression that it is not good at low W.

The finish is also good and looks good, but it is a minus point that the bamboo gauze is about to lick immediately and the BF pin is not included.




Copyright © 2018 Shenzhen Maskking International Trading Co., Ltd. All Aights Reserved